USB Programming Cable - Fits Bafang BBS01 / BBS02 / BBSHD
USB Programming Cable - Fits Bafang BBS01 / BBS02 / BBSHD
Does it fit your bike?
- Fits Bafang BBS01
- Fits Bafang BBS02
- Fits Bafang BBSHD (manufacturer-stated)
- Not for Bafang hub motors
- Not for Other brands of mid-drive motor
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you payBafang mid-drive controllers can be tuned from a computer: pedal-assist levels, speed and current limits and other parameters are set through a programming cable. This USB cable connects a PC to the programming plug of the Bafang BBS01, BBS02 and BBSHD systems. The manufacturer says it lets you set the drive up for more performance or smoother pedal assist.
Key facts as stated by the manufacturer: USB type A plug on one end and a round waterproof plug on the other, 40 inches (about 1 m) long, black.
Check before you order: this is the cable only. The manufacturer does not mention software, so you will need to bring your own compatible Bafang programming tool. Reprogramming the drive can damage the motor, so change one setting at a time and note the current values. The cable is for BBS01, BBS02 and BBSHD systems and is not for Bafang hub motors or other brands.
Connect it with the battery switched on and the display disconnected as your programming tool instructs.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Key specs
| Connector | USB type A male to round waterproof plug |
|---|---|
| Cable length | 1016 mm (40.0 in) |
Compatibility
Compatible with
- Fits Bafang BBS01
- Fits Bafang BBS02
- Fits Bafang BBSHD (manufacturer-stated)
Not compatible with
- Bafang hub motors
- Other brands of mid-drive motor
In the box
- 1 x USB programming cable, 40 in (software not listed)
Install
- Difficulty
- Moderate
- Time
- 15-30 min
Before you order
- 1) Photo of the motor label (BBS01, BBS02 or BBSHD).
- 2) Close-up of the programming plug or display plug on your harness.
- 3) Tell us which programming software you plan to use.
Data source: Manufacturer spec