Park Tool FR-1.3 Freewheel Remover, 12-Spline
Park Tool FR-1.3 Freewheel Remover, 12-Spline
Does it fit your bike?
- Fits Freewheels with 12 splines: 5-10 speed Shimano, SunRace, DNP Epoch, Sachs Aris and similar (per manufacturer listing)
- Not for Freewheels with a different number of splines or notches
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you payTo replace a worn freewheel you first have to get the old one off, and the right splined remover is the way to do it without damaging the hub. This Park Tool FR-1.3 is a 12-spline freewheel remover, listed for 5, 6, 7, 8, 9 and 10-speed Shimano, SunRace, DNP Epoch and Sachs Aris freewheels and similar.
The tool engages the splines on the face of the freewheel, and its hex base takes a large wrench. Hold it in place with the axle nut or skewer while you turn it.
Check before you order: look at the face of your freewheel and count the splines. This tool is for freewheels with 12 splines. It is not for freewheels with a different number of splines or notches. The listing describes it as a metal tool in black.
Always remove the old freewheel with the chain off, and clean the hub threads before fitting the new one.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Compatibility
Compatible with
- Freewheels with 12 splines: 5-10 speed Shimano, SunRace, DNP Epoch, Sachs Aris and similar (per manufacturer listing)
Not compatible with
- Freewheels with a different number of splines or notches
In the box
- 1 x Park Tool FR-1.3 freewheel remover
Install
- Tools
- Large adjustable wrench or bench vise
Before you order
- 1) Close-up photo of the face of your freewheel, showing the splines or notches.
- 2) Photo of the freewheel from the side, with the number of sprockets visible.
Data source: Manufacturer spec