Shimano B05S-RX Resin Disc Brake Pads with Spring
Shimano B05S-RX Resin Disc Brake Pads with Spring
Does it fit your bike?
- Fits Shimano 2-piston calipers that use the B05S pad shape (per manufacturer listing)
- Not for Calipers that use B01S, B03S or other pad shapes
- Not for Calipers with more than 2 pistons
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you payShimano B05S-RX pads in a resin compound with a stainless steel back plate, supplied with the pad spring. The manufacturer's listing says the resin material gives less noise and better modulation, and wears longer than Shimano's older B03S and B01S resin pads.
The listing says these pads are for 2-piston brake calipers. It does not name individual caliper models, so the safest check is the pad code stamped on the back plate of your old pad: if it reads B05S, this is the same pad shape. The listing photo shows a pair of pads with a split pin and a spring.
Check before you order: pad shape differs between Shimano models (B01S, B03S, B05S and others), so a pad that looks similar can still be wrong. Compare the outline and the mounting hole position with the photo on this page. This listing is for 2-piston calipers only.
Replace both pads in the caliper together, and check the rotor for grooves or blue heat marks while the wheel is off.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Compatibility
Compatible with
- Shimano 2-piston calipers that use the B05S pad shape (per manufacturer listing)
Not compatible with
- Calipers that use B01S, B03S or other pad shapes
- Calipers with more than 2 pistons
In the box
- 1 pair of Shimano B05S-RX resin pads with stainless steel back plates
- Pad spring
- Split pin as shown in the listing photo
Install
- Difficulty
- Easy
- Time
- 20-40 min
- Tools
- Hex key set, Needle-nose pliers
Before you order
- 1) Photo of the caliper body showing any brand and model text.
- 2) Photo of the code stamped on the back plate of one old pad.
- 3) Photo of one old pad, friction side up, next to a ruler.
Data source: Manufacturer spec