Semi-Metallic Disc Brake Pads, Select Shimano/Tektro/TRP
Semi-Metallic Disc Brake Pads, Select Shimano/Tektro/TRP
Does it fit your bike?
- Fits Select Shimano MT200 systems (per manufacturer listing)
- Fits Tektro E10.11 pad shape (per manufacturer listing)
- Fits TRP 2-piston systems (per manufacturer listing)
- Not for Calipers whose pad outline differs from the photos
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you pay$16.99
Worn, glazed or squealing disc brake pads are the most common brake fix on an e-bike. These semi-metallic pads are listed by the manufacturer for select Shimano MT200, Tektro E10.11 and TRP 2-piston calipers, and the listing stresses that fit depends on the caliper and pad shape, not on the bike brand.
Choose 2 pairs for the front and rear brake of one bike, or 4 pairs to keep spares. One pair fills one caliper. The pads are black, and the listing photo shows each pair with a split retaining pin.
Check before you order: take one old pad out and compare its outline, the position of its mounting hole and its overall size with the photos on this page. A pad that looks close but is a few millimeters off will not seat in the caliper. This listing is not for calipers whose pad shape differs from the photos.
Replace both pads in a caliper at the same time, and look at the rotor for deep grooves or blue heat marks while the wheel is off. New pads need a short bedding-in ride before they give full braking power.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Compatibility
Compatible with
- Select Shimano MT200 systems (per manufacturer listing)
- Tektro E10.11 pad shape (per manufacturer listing)
- TRP 2-piston systems (per manufacturer listing)
Not compatible with
- Calipers whose pad outline differs from the photos
In the box
- Black semi-metallic brake pad pairs (2 or 4 pairs, per selected option)
- Split retaining pins as shown in the listing photo
Install
- Difficulty
- Easy
- Time
- 20-40 min
- Tools
- Hex key set, Needle-nose pliers
Before you order
- 1) Photo of the caliper body showing any brand and model text.
- 2) Photo of one old pad, friction side up, next to a ruler.
- 3) Photo of the same pad's back plate.
Data source: Manufacturer spec