Mechanical Disc Brake Calipers, Front and Rear Pair

Replace a seized, cracked or worn-out cable-pull disc brake caliper. This pair has one front and one rear caliper in black aluminum alloy, with mounting screws included. They use a one-way piston, linear-pull mechanism, and the listing describes a compact, lightweight body with a long opening for easy pad changes.

The listing supports two mounting styles: 51 mm IS mount and 74 mm post mount. The front caliper is listed as 0 mm and the rear caliper as 20 mm, so keep each one on its own wheel. Rotor sizes listed: front 160 or 180 mm, rear 140 or 160 mm, and both calipers work with a 160 mm rotor.

Check before you order: confirm whether your frame and fork have IS (51 mm) or post-mount (74 mm) brake mounts, measure your rotor diameter, and confirm you use mechanical (cable-pull) brake levers. These calipers are not for hydraulic levers. Rotors, levers and cables are not part of this listing.

Fine adjustment screws let you set the gap between the rotor and the pads once the calipers are mounted.

Not sure it fits? Email photos to support@riderow.com and we'll check before you order.