E-Bike Tail Light with Brake Light, 36-60V

A rear light that has died or cracked leaves you invisible to traffic at night. This 36 V to 60 V tail light has a bright red lens that lights up when the brakes are applied, a running-light circuit and wires for left and right turn signals, with a wide 300 degree viewing angle.

Key facts as stated by the manufacturer: 36 to 60 V, IPX4 water resistance, hard polycarbonate lens, frame-mount bracket, 4.3 x 1.0 x 2.1 in (about 110 x 25 x 53 mm), 90 g. It can be wired to the controller or straight to the battery. Wire functions: white brake negative, blue brake positive, black negative, red running light, yellow left turn, green right turn.

Check before you order: this light has bare wires, so it needs splicing or plug-in connectors, and it only suits systems of 36 V to 60 V. The turn-signal and brake wires only work if your bike has matching switches or controller outputs; without them the light still works as a rear light. Not for 24 V or 72 V systems.

Installation takes about 30 minutes: disconnect the battery, bolt the bracket to the frame or rack, connect the wires by function and insulate every joint.

Not sure it fits? Email photos to support@riderow.com and we'll check before you order.