48/64/72V 1000-1500W Brushless Sine-Wave Controller
48/64/72V 1000-1500W Brushless Sine-Wave Controller
Does it fit your bike?
- Fits 48 V, 64 V and 72 V brushless hub motors rated 1000-1500 W, with or without hall sensors (plug types not stated)
- Not for 24 V and 36 V systems
- Not for Mid-drive motors
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you payThis is a high-power replacement controller for hub-motor e-bikes running 48 V, 64 V or 72 V. It drives 1000 to 1500 W brushless motors with sine-wave control for smoother, quieter acceleration, and it works with both hall-sensor and sensorless motors, so it can rescue a bike whose hall sensors have failed.
Key facts as stated by the manufacturer: 12-MOSFET design in a thick grooved aluminum housing, self-learning motor setup, under-voltage, over-current and stall protection. Every wire carries a printed function label: battery positive and negative, phase wires, throttle, high and low brake inputs and self-learning. About 588 g.
Check before you order: a controller must match your motor and battery. Confirm your pack is 48 V, 64 V or 72 V and your motor is rated 1000 to 1500 W. The manufacturer does not describe the plug types or the current limit, so send photos of your old controller label and wires before ordering. It is not for 24 V or 36 V systems, or for mid-drive motors.
Installation takes about 1 hour. Disconnect the battery and connect only the functions you need; unused wires can stay insulated.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Key specs
| Voltage | 48V / 64V / 72V |
|---|---|
| Power | 1000-1500W |
| Weight | 588 g (20.7 oz) |
Compatibility
Compatible with
- 48 V, 64 V and 72 V brushless hub motors rated 1000-1500 W, with or without hall sensors (plug types not stated)
Not compatible with
- 24 V and 36 V systems
- Mid-drive motors
- Motors above 1500 W
In the box
- 1 x brushless sine-wave controller
Install
- Difficulty
- Advanced
- Time
- 45-90 min
- Tools
- Screwdriver set, Wire stripper and crimp tool, Multimeter, Zip ties
Before you order
- 1) Photo of your current controller label.
- 2) Close-up of the plugs and wires on your controller.
- 3) Photo of the motor label and the battery label.
Data source: Manufacturer spec