3-Pin Julet-Style Pigtail Cable, Female Plug, 900 mm
3-Pin Julet-Style Pigtail Cable, Female Plug, 900 mm
Does it fit your bike?
- Fits Repairs 3-pin Julet-style waterproof plugs on throttles, sensors and lights (needs the opposite sex: this part is female)
- Not for Plugs with a different pin count
- Not for SM, JST or Bafang EB-BUS plugs
Our fit guarantee covers parts we confirm from your photos (free). Without that check, electrical parts can't be returned once connected.
Not sure? Send photos — we check before you payA pigtail is a plug on a short cable with bare wire ends. It is the repair part for a throttle, brake sensor, light or display whose plug has been cut off, burnt or corroded: cut the damaged plug off, splice this pigtail to the wires and the connector is as good as new. This one has a 3-pin female waterproof plug on one end and loose wires on the other.
Key facts as stated by the manufacturer: Julet-style 3-pin female plug, 900 mm (about 35 in) cable, IP66. The same family is sold in 2- to 6-pin versions, so count the pins before you cut anything.
Check before you order: you need the opposite sex to the plug you are replacing. If the part you are repairing has a male plug, choose this female pigtail; if it has a female plug, choose the male version. The manufacturer does not list in text which wire goes to which pin, so note the wire positions on the old plug before cutting and join them one to one.
Soldering or crimping, plus heat-shrink, is recommended for a lasting repair. Disconnect the battery first.
Not sure it fits? Email photos to support@riderow.com and we'll check before you order.
Specs & fit
Key specs
| Connector | 3-pin Julet-style waterproof round, female plug, loose wires on other end |
|---|---|
| Pins | 3 |
| Cable length | 900 mm (35.4 in) |
| Waterproof | IP66 (manufacturer-stated) |
Compatibility
Compatible with
- Repairs 3-pin Julet-style waterproof plugs on throttles, sensors and lights (needs the opposite sex: this part is female)
Not compatible with
- Plugs with a different pin count
- SM, JST or Bafang EB-BUS plugs
- Parts that already have a female plug
In the box
- 1 x 3-pin female pigtail cable, 900 mm
Install
- Difficulty
- Moderate
- Time
- 15-30 min
- Tools
- Wire cutter and stripper, Soldering iron or crimp tool, Heat-shrink tubing
Before you order
- 1) Close-up of the damaged plug (pin count, male or female).
- 2) The wires where the old plug was cut or burnt.
- 3) The part the plug belongs to.
Data source: Manufacturer spec