{"title":"Fits Bafang Hub Motors","description":"\u003cp\u003eParts the maker lists as compatible with Bafang hub motors. Not sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e\n\u003cdiv class=\"rr-buying-guide\"\u003e\n\u003ch2\u003eBefore you order a motor extension cable\u003c\/h2\u003e\n\u003cp\u003eCount the pins on the plug where the motor cable meets the controller harness and match the male and female ends. The 9, 10 and 11-pin cables here are listed for different Bafang hub motors and are not interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you unplug anything:\u003c\/strong\u003e turn the bike off and remove the battery.\u003c\/p\u003e\n\u003cp\u003eGuides: \u003ca href=\"\/blogs\/news\/water-in-the-motor-connector-inspecting-the-9-pin-plug\"\u003einspecting the motor plug\u003c\/a\u003e and \u003ca href=\"\/blogs\/news\/how-to-remove-and-install-a-rear-hub-motor-wheel\"\u003eremoving and installing a rear hub motor wheel\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"9-pin-waterproof-motor-extension-cable-fits-bafang-g020-hub-motor","title":"9-Pin Waterproof Motor Extension Cable, Male to Female - Fits Bafang G020 Hub Motors (60 \/ 70 \/ 125 cm)","description":"\u003cp\u003eAdd reach between a hub motor and its controller. This 9-pin waterproof extension cable has a male plug on one end and a female plug on the other, so it sits in line between the motor lead and the controller socket. Three lengths: 60 cm, 70 cm and 125 cm.\u003c\/p\u003e\u003cp\u003eThe manufacturer lists it for the 9-pin motor plug used on Bafang G020 hub motors (250 to 500 W, front and rear) and on other Bafang hub motors that use the same 9-pin plug, such as the G070 and G370. Bafang motor models come in versions with different plugs, so a model name alone does not prove fit: check the plug on your own motor lead. It is a straight pin-to-pin extension for the three motor phase wires and the sensor lines. It does not convert between plug types.\u003c\/p\u003e\u003cp\u003eImportant: 9-pin plugs come in several shell shapes, and Bafang's larger 750 to 1000 W hub motors use 10- and 11-pin plugs. Look at the plug on your motor lead and match both the pin count and the shell shape. This cable is not for mid-drive (BBS) motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: disconnect the battery, unplug the motor lead from the controller, plug the extension in line, push the plugs together until they are fully seated, and secure the cable with zip ties so the joint is not under strain or near the chain.\u003c\/p\u003e\u003cp\u003eNot sure? Email photos of your motor plug and controller socket to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"60 cm","offer_id":67793201692945,"sku":"RR-CBL-9P-60","price":17.99,"currency_code":"USD","in_stock":true},{"title":"70 cm","offer_id":67793201725713,"sku":"RR-CBL-9P-70","price":15.99,"currency_code":"USD","in_stock":true},{"title":"125 cm","offer_id":67793201758481,"sku":"RR-CBL-9P-125","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d03-cable9p.jpg?v=1792170508"},{"product_id":"10-pin-hub-motor-extension-cable-fits-bafang-g060-g062","title":"10-Pin Hub Motor Extension Cable (L1019) - Fits 10-Pin Bafang G060\/G062","description":"\u003cp\u003eSome Bafang hub motors, including certain G060 and G062 versions, use a 10-pin round connector instead of the common 9-pin plug; other versions use 9 or 11 pins. This 10-pin extension cable (L1019 type) has a male plug on one end and a female plug on the other and sits in line between the motor lead and the controller. It adds reach, or replaces a damaged plug-in extension section with the same 10-pin plugs at each end. It cannot repair a cut in a lead that is fixed into the motor or the controller.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 10-pin waterproof round connectors with metal screw locking rings, 12 AWG pure-copper wire, 24 in (about 61 cm) long, rated 30 A and up to 72 V, IP65, RoHS. The manufacturer says it fits 10-pin Bafang G060 and G062 hub motors, front and rear.\u003c\/p\u003e\u003cp\u003eCheck before you order: count the pins on your motor plug. A 9-pin or 11-pin plug will not mate with this cable, and the screw-ring connector is not the same as a push-together 9-pin plug. It is not for mid-drive motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: disconnect the battery, unplug the motor lead from the controller, thread the cable through, screw both rings down fully and secure the cable with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793743544593,"sku":"RR-CBL-10P-L1019-24","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-10p-g062.jpg?v=1792173768"},{"product_id":"11-pin-hub-motor-extension-cable-fits-bafang-g063-1000w","title":"11-Pin Hub Motor Extension Cable - Fits Bafang G063 1000W","description":"\u003cp\u003eBafang's G063 1000W fat-tire hub motor uses a red 11-pin screw-lock plug, listed by Bafang as connection type G11.6. This extension cable has a female socket on one end and a male plug with a screw collar on the other, and sits between the motor lead and the controller. It adds reach, or replaces a damaged plug-in extension section with the same plugs at each end. It cannot repair a cut in a lead that is fixed into the motor or the controller.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 11 pins, female to male, 50 cm (about 19.7 in), waterproof connectors, tinned copper wire in a PVC jacket, rated for motors up to 1000 W and 48 V. The manufacturer says it fits Bafang G063 1000W hub motors. Three 12 AWG phase wires and six 24 AWG signal wires are connected; two small signal positions are empty.\u003c\/p\u003e\u003cp\u003eCheck before you order: it only mates with the red 11-pin screw-lock plug, not 9-pin, 10-pin or other 11-pin shapes. It is a straight extension, not an adapter, and not for mid-drive motors. If your controller uses a motor temperature sensor, send us a wiring photo first.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: switch the battery off, unplug the motor lead, connect the cable in between, screw each collar down fully and zip-tie the cable away from the brake rotor.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67796099596561,"sku":"RR-CBL-11P-G063-50","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-11p-g063.jpg?v=1792245233"}],"url":"https:\/\/riderow.com\/collections\/fits-bafang-hub.oembed","provider":"RideRow","version":"1.0","type":"link"}