{"title":"All Parts","description":"\u003cp\u003eE-bike spare parts are the replacement components that wear out, work loose or fail on an electric bike's electrical system. This collection covers the small parts behind many no-power and no-assist faults: cadence (pedal-assist) sensors, brake cut-off sensors, throttles, wiring harnesses and extension cables, and displays.\u003c\/p\u003e\n\u003cp\u003eChoose by connector, pin count and display model, not by the name of your bike. A part that plugs in can still fail to talk to your controller, and display compatibility has nothing to do with motor wattage. Photograph your display, its connector, the controller label and the motor cable before you order; \u003ca href=\"https:\/\/riderow.com\/blogs\/news\/4-photos-we-need-to-confirm-a-part-fits-your-e-bike\"\u003ethis guide\u003c\/a\u003e explains why those four matter.\u003c\/p\u003e\n\u003cp\u003eNot sure what failed? Run the \u003ca href=\"https:\/\/riderow.com\/pages\/diagnose\"\u003ethree-minute self-check\u003c\/a\u003e first, then follow the \u003ca href=\"https:\/\/riderow.com\/pages\/e-bike-repair-diy\"\u003ee-bike repair DIY\u003c\/a\u003e guide or the \u003ca href=\"https:\/\/riderow.com\/pages\/e-bike-repair-online\"\u003ee-bike repair online\u003c\/a\u003e guide. RideRow sells parts and publishes installation information; it does not sell batteries or repair bikes.\u003c\/p\u003e\n\u003ch2\u003eE-bike spare parts: frequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are e-bike spare parts?\u003c\/h3\u003e\n\u003cp\u003eE-bike spare parts are replacement components for the electrical and mechanical systems of an electric bike, such as sensors, throttles, displays, wiring and connectors. This collection focuses on the electrical parts behind no-power, no-assist and display faults.\u003c\/p\u003e\n\u003ch3\u003eHow do I know which e-bike spare part fits my bike?\u003c\/h3\u003e\n\u003cp\u003eMatch the connector, pin count and display model rather than the bike name. Four photos settle most questions: the display face, the display connector, the controller label and the motor cable. For a wheel or motor, also measure the dropout width, which is 135, 170 or 190 mm.\u003c\/p\u003e\n\u003ch3\u003eWhich spare part should I replace first when my e-bike will not move?\u003c\/h3\u003e\n\u003cp\u003eStart with the cheap, common causes: the brake cut-off sensors, the throttle, the cadence sensor and the plugs. The display comes next and the controller last, because it is the most expensive suspect. The \u003ca href=\"https:\/\/riderow.com\/collections\/sensors-throttles\"\u003esensors and throttles collection\u003c\/a\u003e covers the first group.\u003c\/p\u003e\n\u003ch3\u003eDoes RideRow sell batteries or repair e-bikes?\u003c\/h3\u003e\n\u003cp\u003eNo. RideRow does not sell batteries and does not repair bikes, take them in for service or make house calls. It sells replacement parts and publishes installation guides; installation is done by you or by a technician you choose.\u003c\/p\u003e\n\u003ch3\u003eWhere can I learn how to install these parts?\u003c\/h3\u003e\n\u003cp\u003eStart with the \u003ca href=\"https:\/\/riderow.com\/pages\/e-bike-repair-diy\"\u003ee-bike repair DIY guide\u003c\/a\u003e for tools, safety rules and symptom-by-symptom checks, and \u003ca href=\"https:\/\/riderow.com\/pages\/e-bike-repair-online\"\u003ee-bike repair online\u003c\/a\u003e for diagnosing and matching parts from home. \u003ca href=\"https:\/\/riderow.com\/pages\/ebike-electrics-101\"\u003eE-Bike Components 101\u003c\/a\u003e explains how the motor, controller and display work together.\u003c\/p\u003e\n\u003cp class=\"rr-src\"\u003eLast updated: October 2026\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What are e-bike spare parts?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"E-bike spare parts are replacement components for the electrical and mechanical systems of an electric bike, such as sensors, throttles, displays, wiring and connectors. This collection focuses on the electrical parts behind no-power, no-assist and display faults.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know which e-bike spare part fits my bike?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Match the connector, pin count and display model rather than the bike name. Four photos settle most questions: the display face, the display connector, the controller label and the motor cable. For a wheel or motor, also measure the dropout width, which is 135, 170 or 190 mm.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which spare part should I replace first when my e-bike will not move?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Start with the cheap, common causes: the brake cut-off sensors, the throttle, the cadence sensor and the plugs. The display comes next and the controller last, because it is the most expensive suspect. The sensors and throttles collection covers the first group.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does RideRow sell batteries or repair e-bikes?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No. RideRow does not sell batteries and does not repair bikes, take them in for service or make house calls. It sells replacement parts and publishes installation guides; installation is done by you or by a technician you choose.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Where can I learn how to install these parts?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Start with the e-bike repair DIY guide for tools, safety rules and symptom-by-symptom checks, and e-bike repair online for diagnosing and matching parts from home. E-Bike Components 101 explains how the motor, controller and display work together.\"\n          }\n        }\n      ]\n    }\n  ]\n}\n\u003c\/script\u003e","products":[{"product_id":"universal-48v-e-bike-thumb-throttle-with-led-battery-display","title":"48V Thumb Throttle with LED Battery Display, 6-Pin SM Plug","description":"\u003cp\u003eThumb-paddle throttle with built-in LED battery gauge. 48V rated, with a 6-pin SM plug and a 65 in (165 cm) cable.\u003c\/p\u003e\u003cp\u003eCheck your current throttle's connector plug and pin count before ordering - not compatible with proprietary sealed harnesses.\u003c\/p\u003e\u003cp\u003eReplaces worn\/cracked throttles on hub-motor conversion kits and most aftermarket controllers.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725609259281,"sku":"RR-THR-3P-LED","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-thumb-throttle-led-gauge-2.jpg?v=1792091238"},{"product_id":"thumb-throttle-with-power-switch-universal-3-pin","title":"Thumb Throttle with Power Switch, 3-Pin Plug","description":"\u003cp\u003eClassic thumb throttle with integrated on\/off power switch, widely used across generic e-bike controllers.\u003c\/p\u003e\u003cp\u003eStandard 3-pin connector; confirm pinout matches your controller before installing - wrong pin order can damage electronics.\u003c\/p\u003e\u003cp\u003eEconomical replacement option for basic conversion kits and repair jobs.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725610832145,"sku":"RR-THR-3P-SW","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-thumb-throttle-power-switch-2.jpg?v=1792091255"},{"product_id":"48v-half-twist-throttle-grip-style","title":"48V Half-Twist Throttle - Grip Style","description":"\u003cp\u003eHalf-twist grip throttle (48V rated) for riders who prefer twist-style control over thumb paddles.\u003c\/p\u003e\u003cp\u003eCompare connector plug\/pin count to your existing throttle before purchase - connector families are not interchangeable.\u003c\/p\u003e\u003cp\u003eNo programming needed once the plug and pin count match your controller's throttle input.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725611192593,"sku":"RR-THR-HALF-48V","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-half-twist-throttle-kit-2.jpg?v=1792091271"},{"product_id":"hydraulic-brake-cut-off-sensor-motor-inhibitor","title":"Hydraulic Brake Cut-Off Sensor (Motor Inhibitor)","description":"\u003cp\u003eMagnetic cut-off sensor for hydraulic brake levers; interrupts motor power the instant the brake is squeezed.\u003c\/p\u003e\u003cp\u003eConfirm your bike uses hydraulic (not mechanical) brakes and that the sensor's pin count matches your controller's brake input.\u003c\/p\u003e\u003cp\u003eSafety-critical replacement - do not substitute a mechanical-brake sensor for a hydraulic setup.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725611487505,"sku":"RR-BRK-HYD-2P","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-hydraulic-brake-cutoff-sensor-kit-2.jpg?v=1792091287"},{"product_id":"2-pin-waterproof-universal-brake-cut-off-sensor","title":"2-Pin Waterproof Brake Cut-Off Sensor","description":"\u003cp\u003eBudget 2-pin waterproof brake cut-off sensor; mounting bracket determines hydraulic vs. mechanical compatibility.\u003c\/p\u003e\u003cp\u003eConfirm your controller's brake input uses a 2-pin connector before ordering.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725611815185,"sku":"RR-BRK-WP-2P","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-waterproof-brake-cutoff-sensor-2.jpg?v=1792091303"},{"product_id":"kt-compatible-8-magnet-pas-cadence-sensor","title":"KT-Compatible 8-Magnet PAS Cadence Sensor","description":"\u003cp\u003e8-magnet pedal-assist cadence sensor for KT-protocol controllers and compatible generic systems.\u003c\/p\u003e\u003cp\u003eCount the magnets on your original sensor ring first - will not work correctly on a 12-magnet system.\u003c\/p\u003e\u003cp\u003eStraightforward bolt-on replacement for worn or cracked PAS rings.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725612273937,"sku":"RR-PAS-8MAG","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-pas-cadence-sensor-8-magnet-2.jpg?v=1792091319"},{"product_id":"kt-v12-l-dual-hall-12-magnet-pas-cadence-sensor","title":"KT V12-L Dual-Hall 12-Magnet PAS Cadence Sensor","description":"\u003cp\u003eDual-Hall-sensor design with 12-magnet ring for finer pedal-assist resolution than standard 8-magnet sensors.\u003c\/p\u003e\u003cp\u003eMatch magnet count and connector pin layout to your original sensor - 8-magnet and 12-magnet rings are not interchangeable.\u003c\/p\u003e\u003cp\u003eHigher-precision option for riders wanting smoother PAS response.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725612667153,"sku":"RR-PAS-12MAG-V12L","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-pas-cadence-sensor-dual-hall-12-magnet-2.jpg?v=1792091334"},{"product_id":"kt-d12-12-magnet-dual-hall-pas-sensor","title":"KT D12 12-Magnet Dual-Hall PAS Sensor","description":"\u003cp\u003e12-magnet dual-Hall PAS sensor for KT-protocol and compatible controllers.\u003c\/p\u003e\u003cp\u003eVerify magnet count and connector match with your existing sensor before installing.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725613158673,"sku":"RR-PAS-12MAG-D12","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-pas-sensor-dual-hall-12-magnet-split-disc-2.jpg?v=1792091350"},{"product_id":"1-to-4-wiring-harness-for-bafang-bbs-mid-drive-motors","title":"1-to-4 Wiring Harness for Bafang BBS Mid-Drive Motors","description":"\u003cp\u003ePurpose-built 1T4 wiring harness connecting motor\/controller\/display\/throttle on Bafang BBS-series mid-drive systems.\u003c\/p\u003e\u003cp\u003eConfirm you have a Bafang BBS-family mid-drive motor before ordering - not for hub-motor kits.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725613682961,"sku":"RR-CBL-BBS-1T4","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-wiring-harness-1-to-4-mid-drive-2.jpg?v=1792091367"},{"product_id":"9-pin-motor-extension-cable-male-to-female-z916","title":"9-Pin Motor Extension Cable, 60cm - Male to Female (Higo\/Julet Z916-type)","description":"\u003cp\u003eA 60 cm (23.6 in) waterproof extension for the round 9-pin motor cable: a \u003cstrong\u003emale\u003c\/strong\u003e plug on one end and a \u003cstrong\u003efemale\u003c\/strong\u003e plug on the other, wired pin-for-pin. Use it when a new motor or controller sits further away than the original, or to move the plug joint away from a spot where it gets wet or strained.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt is not universal.\u003c\/strong\u003e Round 9-pin e-bike plugs come in several families (Higo\/Julet Z910, Z916, Bafang G9.1) with different shell sizes and keys. This cable fits the \u003cstrong\u003eZ916-type\u003c\/strong\u003e plug (3 thick phase pins and 6 thin signal pins, alignment arrow on the shell). It only extends a connection that already plugs together; it does not adapt one plug family or pin layout to another.\u003c\/p\u003e\u003cp\u003eBefore you order, unplug your motor cable and compare both ends with the photos. If your plugs do not look the same, or the pin count differs, this cable will not fit.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure which plug you have? Send us a face-on photo of it through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we will check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725614108945,"sku":"RR-CBL-9P-UNIV","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-motor-extension-cable-9-pin-60cm-2.jpg?v=1792091205"},{"product_id":"352-piece-waterproof-connector-pin-kit-with-crimping-tool","title":"352-Piece Waterproof Connector Pin Kit with Crimping Tool","description":"\u003cp\u003e352-piece assortment of waterproof connector pins\/housings plus a crimping tool for on-the-spot cable and connector repairs.\u003c\/p\u003e\u003cp\u003eBigger bulk assortment than our standard Crimping Kit - useful if you're stocking multiple pin sizes\/housings rather than doing a single splice.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725614371089,"sku":"RR-TOOL-CRIMP-352","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-waterproof-connector-pin-kit-crimping-tool-2.jpg?v=1792091382"},{"product_id":"7-protocol-universal-e-bike-display-with-adapter-cable","title":"7-Protocol E-Bike Display with Adapter Cable","description":"\u003cp\u003eWorks across 7 common controller communication protocols, which you select in the display's settings menu, and comes with an adapter cable - a rare display that isn't locked to one controller brand.\u003c\/p\u003e\u003cp\u003eStill match your controller's connector plug and pin count to the included adapter before ordering; \"multi-protocol\" means broad compatibility, not literally every controller.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNot sure it fits? Send us photos through our \u003ca href=\"\/#fit-finder\"\u003erepair form\u003c\/a\u003e or email support@riderow.com and we'll check before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":54725614666001,"sku":"RR-DISP-7P-UNIV","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/riderow-universal-ebike-display-adapter-cable-2.jpg?v=1792091398"},{"product_id":"thumb-throttle-3-pin-waterproof-fits-bafang-bbs01-bbs02-bbshd","title":"Thumb Throttle with 3-Pin Waterproof Female Plug - Fits Bafang BBS01 \/ BBS02 \/ BBSHD (22.2 mm Handlebar)","description":"\u003cp\u003eReplace a cracked, stuck or dead throttle with a direct-fit thumb throttle for Bafang e-bike systems. The cable ends in a 3-pin waterproof female plug that mates with the male throttle lead on the standard 1T4 harness used by Bafang BBS01B, BBS02B and BBSHD mid-drive kits, and by Bafang hub-motor kits wired with the same harness.\u003c\/p\u003e\u003cp\u003eThe thumb paddle clamps onto a 22.2 mm (7\/8\") handlebar. Choose the cable length that reaches your harness: 23 cm when the harness lead already runs up to the bar, or 70 cm when you need extra reach.\u003c\/p\u003e\u003cp\u003eCheck before you order: unplug your current throttle and look at the plug. This part fits a round, waterproof 3-pin female connector. It is not for 2-pin or 5-pin plugs, for twist-grip throttles, or for systems from other brands whose 3-pin plug has a different shell or pin order.\u003c\/p\u003e\u003cp\u003eInstallation: disconnect the battery, loosen the grip or brake clamp enough to slide the old throttle off, fit the new one, route the cable with zip ties, reconnect and test. Allow about 15 minutes. If the throttle seems dead afterwards, check that pedal assist is not set to level 0, which disables the throttle on some Bafang setups.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"23 cm","offer_id":67793201594641,"sku":"RR-THR-THUMB-23","price":38.99,"currency_code":"USD","in_stock":true},{"title":"70 cm","offer_id":67793201627409,"sku":"RR-THR-THUMB-70","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d01-throttle.jpg?v=1792170493"},{"product_id":"cable-brake-levers-motor-cut-off-3-pin-pair-fits-bafang-bbs","title":"Cable Brake Levers with Motor Cut-Off, 3-Pin Waterproof Plug, Pair - Fits Bafang BBS01 \/ BBS02 \/ BBSHD","description":"\u003cp\u003eA left and right pair of cable-pull brake levers with a built-in motor cut-off switch. Pull either lever and the controller cuts motor power immediately, a standard safety function on Bafang systems. Each lever has a 30 cm lead ending in a 3-pin waterproof male plug that mates with the female brake leads on the standard 1T4 harness used by Bafang BBS01B, BBS02B and BBSHD mid-drive kits, and by Bafang hub-motor kits wired the same way.\u003c\/p\u003e\u003cp\u003eThese levers are for cable-actuated brakes: V-brakes and mechanical disc brakes. They are not for hydraulic brakes. Check the clearance next to your throttle and shifter before ordering, and confirm your handlebar is 22.2 mm.\u003c\/p\u003e\u003cp\u003eBefore you order, unplug your current brake lead and look at the plug. It should be a 3-pin waterproof female connector. Older BBS wiring with 2-pin brake plugs needs a 2-pin to 3-pin adapter, which is not included.\u003c\/p\u003e\u003cp\u003eAfter installing, always test the cut-off before riding: lift the rear wheel, turn the pedals with assist on, then pull each lever. The motor must stop at once. Allow 30 to 45 minutes including cable setup and brake adjustment.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793201660177,"sku":"RR-BRK-LEVER-3P","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d02-brakelevers.jpg?v=1792170500"},{"product_id":"9-pin-waterproof-motor-extension-cable-fits-bafang-g020-hub-motor","title":"9-Pin Waterproof Motor Extension Cable, Male to Female - Fits Bafang G020 Hub Motors (60 \/ 70 \/ 125 cm)","description":"\u003cp\u003eAdd reach between a hub motor and its controller. This 9-pin waterproof extension cable has a male plug on one end and a female plug on the other, so it sits in line between the motor lead and the controller socket. Three lengths: 60 cm, 70 cm and 125 cm.\u003c\/p\u003e\u003cp\u003eThe manufacturer lists it for the 9-pin motor plug used on Bafang G020 hub motors (250 to 500 W, front and rear) and on other Bafang hub motors that use the same 9-pin plug, such as the G070 and G370. Bafang motor models come in versions with different plugs, so a model name alone does not prove fit: check the plug on your own motor lead. It is a straight pin-to-pin extension for the three motor phase wires and the sensor lines. It does not convert between plug types.\u003c\/p\u003e\u003cp\u003eImportant: 9-pin plugs come in several shell shapes, and Bafang's larger 750 to 1000 W hub motors use 10- and 11-pin plugs. Look at the plug on your motor lead and match both the pin count and the shell shape. This cable is not for mid-drive (BBS) motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: disconnect the battery, unplug the motor lead from the controller, plug the extension in line, push the plugs together until they are fully seated, and secure the cable with zip ties so the joint is not under strain or near the chain.\u003c\/p\u003e\u003cp\u003eNot sure? Email photos of your motor plug and controller socket to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"60 cm","offer_id":67793201692945,"sku":"RR-CBL-9P-60","price":42.99,"currency_code":"USD","in_stock":true},{"title":"70 cm","offer_id":67793201725713,"sku":"RR-CBL-9P-70","price":39.99,"currency_code":"USD","in_stock":true},{"title":"125 cm","offer_id":67793201758481,"sku":"RR-CBL-9P-125","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d03-cable9p.jpg?v=1792170508"},{"product_id":"3-pin-waterproof-extension-cable-throttle-brake-fits-bafang","title":"3-Pin Waterproof Extension Cable for Throttle or Brake Lever, Male to Female - Fits Bafang Systems (20 \/ 130 cm)","description":"\u003cp\u003eA simple in-line extension for the 3-pin waterproof plugs used on Bafang e-bike throttles and brake levers. One end is a male plug and the other a female plug, so it slots between a throttle or brake-lever lead and the harness without changing anything else. Use it when a cable falls short after a handlebar swap, a stem riser or a new cable route, or when a lead has been damaged and you want to keep the original part.\u003c\/p\u003e\u003cp\u003eTwo lengths: 20 cm for a small gain in reach and 130 cm for long runs on cargo bikes or tall handlebars.\u003c\/p\u003e\u003cp\u003eIt fits the yellow 3-pin throttle and brake plugs on the standard 1T4 harness used by Bafang BBS01B, BBS02B and BBSHD mid-drive kits and by Bafang hub-motor kits. It does not change the pin count and it is not for 2-pin, 5-pin or 6-pin plugs. Do not use it to join parts from different systems: a plug that looks similar can have a different pin order.\u003c\/p\u003e\u003cp\u003eBefore you order, take a photo of the two plugs you want to join. Installation takes about 5 minutes: disconnect the battery, unplug the throttle or brake lead from the harness, plug the extension in line, press until the plugs seat, and secure the slack with zip ties away from moving parts.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"20 cm","offer_id":67793201922321,"sku":"RR-CBL-3P-20","price":38.99,"currency_code":"USD","in_stock":true},{"title":"130 cm","offer_id":67793201955089,"sku":"RR-CBL-3P-130","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d04-cable3p.jpg?v=1792170515"},{"product_id":"wheel-speed-sensor-spoke-magnet-4-pin-fits-bafang-m510-m600","title":"Wheel Speed Sensor with Spoke Magnet, 4-Pin Waterproof Plug, 40 cm - Fits Bafang M410 \/ M510 \/ M600 \/ M620 Systems","description":"\u003cp\u003eRestore your speedometer and speed-based assist with a replacement wheel speed sensor and spoke magnet for Bafang mid-drive systems. The sensor mounts on the chainstay and reads a magnet clipped to a spoke, with a dual Hall sensor for reliable signal detection. The 40 cm cable ends in a blue 4-pin waterproof male plug.\u003c\/p\u003e\u003cp\u003eFits the speed-sensor port on Bafang M410, M510, M600 and M620 systems whose harness has the blue 4-pin speed plug. A missing or misaligned speed signal usually shows as zero speed on the display, wrong trip data, or a speed-related error message.\u003c\/p\u003e\u003cp\u003eKey facts: 5 V supply (+\/- 0.5 V), under 10 mA, IP65, operating range -40 to 125 C. The gap between sensor and magnet must be 10 to 20 mm. Mount the sensor on the rear chainstay with an M5 x 12 Phillips screw at 1 N.m, clip the magnet to a spoke and tighten its Torx screw at 1.5 to 2 N.m.\u003c\/p\u003e\u003cp\u003eBefore you order: unplug your current speed sensor and check the plug. It must be a blue, 4-pin waterproof plug. BBS01B \/ BBS02B \/ BBSHD speed sensors use a different plug and are not covered by this part.\u003c\/p\u003e\u003cp\u003eAllow about 20 to 30 minutes. Not sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793202053393,"sku":"RR-SPD-SD-4P-40","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d05-speedsensor.jpg?v=1792170523"},{"product_id":"uart-lcd-display-5-pin-fits-bafang-bbs01b-bbs02b-bbshd","title":"UART LCD Display with 5-Pin Waterproof Plug, 22.2 mm Clamp - Fits Bafang BBS01B \/ BBS02B \/ BBSHD (UART Systems Only)","description":"\u003cp\u003eA compact LCD display for Bafang systems that talk UART. It shows speed, trip and total distance, battery level and the assist level. The 55 cm cable ends in a 5-pin waterproof plug, and the display clamps onto a 22.2 mm handlebar with its integrated bracket.\u003c\/p\u003e\u003cp\u003eFits Bafang BBS01B, BBS02B and BBSHD mid-drive systems, and Bafang hub-motor kits, whose controller uses the UART protocol and whose harness has the 5-pin display plug. It will not work on CAN-bus systems, including Bafang M-series mid-drives, even if the plug looks similar. Protocol matters more than plug shape: the display and the controller must speak the same one, and a display that lights up is not proof that it communicates.\u003c\/p\u003e\u003cp\u003eBefore you order, please check three things: the label on your controller or motor (it should say UART, not CAN), the shape of your current display plug (round 5-pin), and the model of your current display. If you are not sure, send us the photos below and we will confirm. After installing, confirm that the display shows speed while you spin the wheel and that you can change assist levels. Features such as lights and walk assist depend on your controller.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793202217233,"sku":"RR-DISP-UART-5P","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d06-display.jpg?v=1792170529"},{"product_id":"handlebar-clamp-bracket-lcd-display-fits-bafang-dpc11","title":"Handlebar Clamp Bracket for LCD Display, Replacement Holder - Fits Bafang DPC11 Display","description":"\u003cp\u003eA replacement handlebar holder for the compact Bafang DPC11 LCD display. If the clamp of your display has cracked, lost its tab or no longer grips the bar, this holder lets you keep the display instead of replacing it.\u003c\/p\u003e\u003cp\u003eThe holder fits a 22.2 mm (7\/8\") handlebar, the diameter the DPC11 is designed for. It attaches to the underside of the display, where the original bracket sat, and clamps around the bar.\u003c\/p\u003e\u003cp\u003eFits the Bafang DPC11 only. Displays with a different outline, such as the DPC18, 850C or 500C, use different holders. If your display is a different model, send us a photo of the back of the display and we will tell you which holder you need.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: remove the old bracket from the display, place the display on the bar, fit the new holder on the underside and tighten the two small screws that hold it to the display, then tighten the bar clamp. Do not overtighten: the display housing is plastic, and the manufacturer's tightening torque for the holder screws is only 0.5 N.m.\u003c\/p\u003e\u003cp\u003eCheck the box contents before you start. Holder screws are not confirmed as included, so keep the original screws if they are still usable.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793202479377,"sku":"RR-DISP-C11-HOLDER","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-d07-holder.jpg?v=1792170536"},{"product_id":"bafang-g063-750w-48v-rear-hub-motor-cassette-11-pin","title":"Bafang G063 750W 48V Rear Hub Motor, 20 in Wheel, Cassette Type, 11-Pin","description":"\u003cp\u003eA Bafang G063 rear hub motor rated 750 W at 48 V, for disc-brake bikes and wound for 20-inch wheels. It has a cassette-type freewheel body, a 4-hall sensor set and a 250 mm motor lead ending in an 11-pin plug (Bafang connector G11.2). Axle length is 235 mm. This is a bare motor: no rim, spokes, tire, controller or display are included.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFit dimensions:\u003c\/b\u003e axle length 235 mm. Over-locknut (OLD) width: to be confirmed. Bafang lists 175 mm for this motor family, and we confirm the width of this unit against your dropout photo before the motor ships. Bafang lists this motor family for fat-tire and cargo bikes; tire width range for this unit: to be confirmed. Your rear dropout needs to match the motor's OLD width. Spoke holes: to be confirmed. Bafang lists 36 holes (36H, 12G spokes) for this motor family, and we count them from your motor photo before the motor ships.\u003c\/p\u003e\u003cp\u003eBefore you buy, check three things: your frame's rear dropout width, that your bike uses disc brakes, and that your controller has a matching 11-pin motor plug (or that you are replacing the controller too). In a wheel size other than 20 inches, top speed and torque change. Lacing the motor into a rim is a job for a wheel builder.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow ordering works:\u003c\/b\u003e motors are checked before they ship. After you order, we email you to ask for three photos: your rear dropout with a tape measure across it, the label on your current motor (with its spokes in view, so we can count the spoke holes), and your controller's motor plug. We confirm fit before the motor ships. If it does not fit, we refund you in full before anything ships.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793236394257,"sku":"RR-MTR-G063-750-C11","price":242.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-motor-h550-750.jpg?v=1792172562"},{"product_id":"bafang-g062-750w-48v-rear-hub-motor-cassette-9-pin","title":"Bafang G062 750W 48V Rear Hub Motor, 20 in Wheel, Cassette Type","description":"\u003cp\u003eA Bafang G062 rear hub motor rated 750 W at 48 V, for disc-brake bikes and wound for 20-inch wheels. Manufacturer code DC: disc mount with a cassette-type freewheel body. It has a 250 mm motor lead. Plug type: to be confirmed. It is listed as a 9-pin plug, but Bafang's spec for this motor lists 10-pin (G10.3) and 11-pin (G11.6) plugs, so we check the plug against your controller photo before the motor ships. This is a bare motor: no rim, spokes, tire, controller or display are included.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFit dimensions:\u003c\/b\u003e over-locknut (OLD) width 175 mm and axle length 235 mm (Bafang spec). Bafang also makes a 190 mm OLD \/ 246 mm axle version of this motor, so the exact width is to be confirmed: we match it to your dropout photo before the motor ships. Built for fat-tire bikes: Bafang lists this motor for fat bikes and all-terrain bikes. Tire width range: to be confirmed (not published). Your rear dropout needs to match the motor's OLD width. Spoke holes: 36 (Bafang spec: 36H, 12G spokes), so the rim needs 36 spoke holes.\u003c\/p\u003e\u003cp\u003eBefore you buy, check three things: your frame's rear dropout width, that your bike uses disc brakes, and that your controller has a matching motor plug (or that you are replacing the controller too). In a wheel size other than 20 inches, top speed and torque change. Lacing the motor into a rim is a job for a wheel builder.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow ordering works:\u003c\/b\u003e motors are checked before they ship. After you order, we email you to ask for three photos: your rear dropout with a tape measure across it, the label on your current motor, and your controller's motor plug. We confirm fit before the motor ships. If it does not fit, we refund you in full before anything ships.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793237082385,"sku":"RR-MTR-G062-750-C9","price":242.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-motor-h550-750_a8e10328-6e7d-4007-9743-1ce85ccbd86e.jpg?v=1792172569"},{"product_id":"bafang-g063-1000w-48v-rear-hub-motor-threaded-11-pin","title":"Bafang G063 1000W 48V Rear Hub Motor, 24 in Wheel, Threaded, 11-Pin","description":"\u003cp\u003eA Bafang G063 rear hub motor rated 1000 W at 48 V, for disc-brake bikes and wound for 24-inch wheels. It takes a threaded (screw-on) freewheel, has a 4-hall sensor set and a 250 mm motor lead ending in an 11-pin plug (Bafang connector G11.6). Axle length is 240 mm. This is a bare motor: no rim, spokes, tire, freewheel, controller or display are included. Rated 1000 W, which is above the 750 W limit for Class 1-3 e-bikes in most US states; check your local rules.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFit dimensions:\u003c\/b\u003e axle length 240 mm. Over-locknut (OLD) width: to be confirmed. Bafang lists 175 mm for the 20 in and 26 in builds of the G063 1000 W; this 24 in build is not in that table, so we confirm the width against your dropout photo before the motor ships. Bafang lists this motor for fat-tire and cargo bikes; tire width range for this unit: to be confirmed. Your rear dropout needs to match the motor's OLD width. Spoke holes: 36 (Bafang spec: 36H, 12G spokes), so the rim needs 36 spoke holes.\u003c\/p\u003e\u003cp\u003eBefore you buy, check three things: your frame's rear dropout width, that your bike uses disc brakes, and that your controller has a matching 11-pin motor plug (or that you are replacing the controller too). In a wheel size other than 24 inches, top speed and torque change. Lacing the motor into a rim is a job for a wheel builder.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow ordering works:\u003c\/b\u003e motors are checked before they ship. After you order, we email you to ask for three photos: your rear dropout with a tape measure across it, the label on your current motor, and your controller's motor plug. We confirm fit before the motor ships. If it does not fit, we refund you in full before anything ships.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793237311761,"sku":"RR-MTR-G063-1000-T11","price":253.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bf-motor-h550-1000.jpg?v=1792172576"},{"product_id":"9-pin-motor-extension-cable-female-to-male-60-cm","title":"9-Pin Waterproof Motor Extension Cable, Female to Male","description":"\u003cp\u003eA crushed, pinched or water-damaged motor lead is a common reason a hub-motor e-bike cuts out or loses power. This 9-pin waterproof extension cable has a female plug on one end and a male plug on the other. It adds reach between two plugs that already mate, or replaces a damaged plug-in extension section that has the same plugs at each end. It cannot repair a cut in a lead that is fixed into the motor or the controller.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 9-pin round waterproof plugs, 60 cm (about 24 in) long, a soft flexible outer jacket, and arrow marks on the plugs so you can line the two halves up before pushing them together.\u003c\/p\u003e\u003cp\u003eCheck before you order: 9-pin motor plugs come in several shell shapes (for example Z910 and Z916 types) and the manufacturer does not say which one this is. Match the shape and the male\/female sex of your plugs with a close-up photo. It is not for 10-pin or 6-pin plugs or for mid-drive motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: switch the battery off, unplug the old lead, push the plugs together following the arrows until they seat fully, and tie the cable clear of the chain and wheel.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793743413521,"sku":"RR-CBL-9P-FM-60","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-9p-fm-60.jpg?v=1792173738"},{"product_id":"9-pin-motor-cable-male-plug-with-hall-leads-60-cm","title":"9-Pin Motor Cable, Male Plug with Hall Leads, 60 cm","description":"\u003cp\u003eWhen the 9-pin plug on a hub-motor lead or on the controller side has been pulled out, burnt or corroded, or the lead is torn where it leaves the motor, a cable with a fresh male 9-pin plug can replace the damaged section. Whether it works on your bike depends on the plug, the pin layout and how the loose end is joined. This cable has a waterproof male 9-pin plug at one end and a 60 cm lead; the other end splits into individual hall-sensor and motor phase wires.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 9-pin male plug, 60 cm cable, 12-72 V, arrow marks on the plug for alignment, made for small nine-core brushless geared and gearless hub motors.\u003c\/p\u003e\u003cp\u003eCheck before you order: this is not a straight extension. The split end has to be joined to your own wiring by function. Use a multimeter to map which wire carries each phase, +5 V, ground, each Hall signal and any extra line, then join each one to the wire with the same function. Wire colors only help you tell the wires apart; they differ between makers. It suits people, or shops, comfortable with soldering or crimping. If you only need extra length, a female-to-male extension cable is the better part. The manufacturer does not state the plug shell family (Z910, Z916 and others exist), so compare the shell, the key and the gender with your own plug by photo. If the cable has to pass through a motor axle, measure its outside diameter against the axle hole first.\u003c\/p\u003e\u003cp\u003eDisconnect the battery before touching any wiring and insulate every joint.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793743479057,"sku":"RR-CBL-9P-M-60","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-9p-male-60.jpg?v=1792173753"},{"product_id":"9-pin-hub-motor-cable-split-6-pin-hall-3-pin-phase","title":"9-Pin Hub Motor Cable, Female Plug to 6 Loose Signal Terminals + 3 Phase Bullets","description":"\u003cp\u003eSome controllers take the motor's signal wires and its three phase wires on separate connectors, while many hub motors bring everything out on one 9-pin plug. This cable has a waterproof 9-pin female plug on one end, made to mate with a 9-pin male motor plug. The other end has no finished multi-pin plugs: the six thin signal wires end in loose crimped terminals, and the three thick phase wires end in single bullet connectors.\u003c\/p\u003e\u003cp\u003eKey facts from the supplier's listing and photos: IP65 rating, ABS shell on the 9-pin plug, maximum voltage 48 V. The six signal wires are black, green, white, blue, red and yellow; the three phase wires are yellow, blue and green. On many systems five of the six signal wires are +5 V, ground and the three Hall signals, and the sixth is another line such as a speed or temperature signal, so confirm what each one does on your motor and controller. The supplier's size drawing shows about 60 cm (23.6 in) of cable from the plug to where the wires split, and about 80 cm (31.5 in) overall.\u003c\/p\u003e\u003cp\u003eThis is not a plug-in adapter. To connect it you need a housing that mates with your controller's signal plug: map every wire with a meter first, then push each terminal into the cavity for its function, one pin at a time. If the terminals do not fit your housing, matching terminals have to be crimped on. The supplier's package list names only the cable. One of the supplier's photos also shows a loose white plastic housing, but its pin count is not stated, so plan to supply a housing that matches your controller.\u003c\/p\u003e\u003cp\u003eCheck before you order: the 9-pin female plug has to mate with your motor's 9-pin male plug, in the same shell family; the signal terminals have to fit the housing for your controller's signal plug; and the three phase bullets have to match your controller's phase connectors in size and gender. Not for 10-pin motors, mid-drive systems, or controllers with a single 9-pin motor socket.\u003c\/p\u003e\u003cp\u003eDisconnect the battery before changing any connection. Keep +5 V and ground on their correct pins; swapping them can destroy the Hall sensors.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793743511825,"sku":"RR-CBL-9P-SPLIT-6H3P","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-9p-to-6h3p.jpg?v=1792173761"},{"product_id":"10-pin-hub-motor-extension-cable-fits-bafang-g060-g062","title":"10-Pin Hub Motor Extension Cable (L1019) - Fits 10-Pin Bafang G060\/G062","description":"\u003cp\u003eSome Bafang hub motors, including certain G060 and G062 versions, use a 10-pin round connector instead of the common 9-pin plug; other versions use 9 or 11 pins. This 10-pin extension cable (L1019 type) has a male plug on one end and a female plug on the other and sits in line between the motor lead and the controller. It adds reach, or replaces a damaged plug-in extension section with the same 10-pin plugs at each end. It cannot repair a cut in a lead that is fixed into the motor or the controller.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 10-pin waterproof round connectors with metal screw locking rings, 12 AWG pure-copper wire, 24 in (about 61 cm) long, rated 30 A and up to 72 V, IP65, RoHS. The manufacturer says it fits 10-pin Bafang G060 and G062 hub motors, front and rear.\u003c\/p\u003e\u003cp\u003eCheck before you order: count the pins on your motor plug. A 9-pin or 11-pin plug will not mate with this cable, and the screw-ring connector is not the same as a push-together 9-pin plug. It is not for mid-drive motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: disconnect the battery, unplug the motor lead from the controller, thread the cable through, screw both rings down fully and secure the cable with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793743544593,"sku":"RR-CBL-10P-L1019-24","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/cbl-10p-g062.jpg?v=1792173768"},{"product_id":"2-pin-julet-style-waterproof-extension-cable-female-male","title":"2-Pin Julet-Style Waterproof Extension Cable, F\/M","description":"\u003cp\u003eThrottles, brake sensors, gear sensors, lights and displays on e-bikes use small round waterproof plugs, and the lead is often a few inches too short once a part is replaced or moved. This 2-pin extension cable adds reach: a female plug on one end, a male plug on the other, so it plugs in line between the part and its harness.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 2-pin Julet-style round waterproof plugs, 50 cm or 80 cm overall length including the plugs, copper conductors with gold-plated contacts, waterproof rating IP65 to IP66 in different places in its specifications, rated 3 A. Choose the length with the selector above.\u003c\/p\u003e\u003cp\u003eCheck before you order: count the pins on your plug (this one is two-pin) and check which end is male and which is female. This cable does not change the pin count or the plug family, so it cannot adapt a Julet-style plug to an SM, JST or Bafang plug. Do not use it for motor phase wires.\u003c\/p\u003e\u003cp\u003eInstallation takes a few minutes: switch the battery off, unplug the part, plug the cable in line, push the plugs together until they click and tie the cable away from moving parts.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"50 cm (19.7 in)","offer_id":67793743708433,"sku":"RR-JUL-EXT-2P-50","price":29.99,"currency_code":"USD","in_stock":true},{"title":"80 cm (31.5 in)","offer_id":67793743741201,"sku":"RR-JUL-EXT-2P-80","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-ext-2p.jpg?v=1792173776"},{"product_id":"3-pin-julet-style-waterproof-extension-cable-female-male","title":"3-Pin Julet-Style Waterproof Extension Cable, F\/M","description":"\u003cp\u003eThrottles, brake sensors, gear sensors, lights and displays on e-bikes use small round waterproof plugs, and the lead is often a few inches too short once a part is replaced or moved. This 3-pin extension cable adds reach: a female plug on one end, a male plug on the other, so it plugs in line between the part and its harness.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 3-pin Julet-style round waterproof plugs, 50 cm or 80 cm overall length including the plugs, copper conductors with gold-plated contacts, waterproof rating IP65 to IP66 in different places in its specifications, rated 3 A. Choose the length with the selector above.\u003c\/p\u003e\u003cp\u003eCheck before you order: count the pins on your plug (this one is three-pin) and check which end is male and which is female. This cable does not change the pin count or the plug family, so it cannot adapt a Julet-style plug to an SM, JST or Bafang plug. Do not use it for motor phase wires.\u003c\/p\u003e\u003cp\u003eInstallation takes a few minutes: switch the battery off, unplug the part, plug the cable in line, push the plugs together until they click and tie the cable away from moving parts.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"50 cm (19.7 in)","offer_id":67793743773969,"sku":"RR-JUL-EXT-3P-50","price":29.99,"currency_code":"USD","in_stock":true},{"title":"80 cm (31.5 in)","offer_id":67793743806737,"sku":"RR-JUL-EXT-3P-80","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-ext-3p.jpg?v=1792173781"},{"product_id":"5-pin-julet-style-waterproof-extension-cable-female-male","title":"5-Pin Julet-Style Waterproof Extension Cable, F\/M","description":"\u003cp\u003eThrottles, brake sensors, gear sensors, lights and displays on e-bikes use small round waterproof plugs, and the lead is often a few inches too short once a part is replaced or moved. This 5-pin extension cable adds reach: a female plug on one end, a male plug on the other, so it plugs in line between the part and its harness.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 5-pin Julet-style round waterproof plugs, 50 cm or 80 cm overall length including the plugs, copper conductors with gold-plated contacts, waterproof rating IP65 to IP66 in different places in its specifications, rated 3 A. Choose the length with the selector above.\u003c\/p\u003e\u003cp\u003eCheck before you order: count the pins on your plug (this one is five-pin) and check which end is male and which is female. This cable does not change the pin count or the plug family, so it cannot adapt a Julet-style plug to an SM, JST or Bafang plug. Do not use it for motor phase wires.\u003c\/p\u003e\u003cp\u003eInstallation takes a few minutes: switch the battery off, unplug the part, plug the cable in line, push the plugs together until they click and tie the cable away from moving parts.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"50 cm (19.7 in)","offer_id":67793743839505,"sku":"RR-JUL-EXT-5P-50","price":29.99,"currency_code":"USD","in_stock":true},{"title":"80 cm (31.5 in)","offer_id":67793743872273,"sku":"RR-JUL-EXT-5P-80","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-ext-5p.jpg?v=1792173788"},{"product_id":"2-pin-julet-style-y-splitter-cable-2-female-1-male","title":"2-Pin Julet-Style Y-Splitter Cable, 2 Female to 1 Male","description":"\u003cp\u003eA Y-splitter lets one two-pin harness connection feed two parts, for example a headlight and a second light, or a sensor and a display, without cutting any wires. This cable has two female two-pin plugs on the branches and one male two-pin plug on the trunk, so it plugs into a harness socket and gives you two sockets in return.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: two-pin Julet-style round waterproof plugs, IP65, copper conductors with gold-plated contacts, 24 in (61 cm) overall or a shorter 7 in (18 cm) version. The manufacturer lists it for lights, brake sensors, gear sensors, throttles and other low-current accessories on conversion kits.\u003c\/p\u003e\u003cp\u003eCheck before you order: this is the 2-female-to-1-male version, so the trunk plug is male. Count the pins on your plug (two here) and check the sex of the harness socket you want to branch. Both branches share one connection and one signal, so do not split a throttle or a speed signal and expect each branch to work independently. Not for motor or battery wiring.\u003c\/p\u003e\u003cp\u003eInstallation takes a few minutes: switch the battery off, unplug the part, plug the trunk into the harness and each branch into a part, then secure the cable with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"7 in (18 cm)","offer_id":67793744068881,"sku":"RR-JUL-Y-2P-7","price":31.99,"currency_code":"USD","in_stock":true},{"title":"24 in (61 cm)","offer_id":67793744101649,"sku":"RR-JUL-Y-2P-24","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-y1t2-2p.jpg?v=1792173795"},{"product_id":"3-pin-julet-style-y-splitter-cable-2-female-1-male","title":"3-Pin Julet-Style Y-Splitter Cable, 2 Female to 1 Male","description":"\u003cp\u003eA Y-splitter lets one three-pin harness connection feed two parts, for example a headlight and a second light, or a sensor and a display, without cutting any wires. This cable has two female three-pin plugs on the branches and one male three-pin plug on the trunk, so it plugs into a harness socket and gives you two sockets in return.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: three-pin Julet-style round waterproof plugs, IP65, copper conductors with gold-plated contacts, 24 in (61 cm) overall. The manufacturer lists it for lights, brake sensors, gear sensors, throttles and other low-current accessories on conversion kits.\u003c\/p\u003e\u003cp\u003eCheck before you order: this is the 2-female-to-1-male version, so the trunk plug is male. Count the pins on your plug (three here) and check the sex of the harness socket you want to branch. Both branches share one connection and one signal, so do not split a throttle or a speed signal and expect each branch to work independently. Not for motor or battery wiring.\u003c\/p\u003e\u003cp\u003eInstallation takes a few minutes: switch the battery off, unplug the part, plug the trunk into the harness and each branch into a part, then secure the cable with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"24 in (61 cm)","offer_id":67793744134417,"sku":"RR-JUL-Y-3P-24","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-y1t2-3p.jpg?v=1792173799"},{"product_id":"3-pin-julet-style-pigtail-cable-female-plug-900-mm","title":"3-Pin Julet-Style Pigtail Cable, Female Plug, 900 mm","description":"\u003cp\u003eA pigtail is a plug on a short cable with bare wire ends. It is the repair part for a throttle, brake sensor, light or display whose plug has been cut off, burnt or corroded: cut the damaged plug off, splice this pigtail to the wires and the connector is as good as new. This one has a 3-pin female waterproof plug on one end and loose wires on the other.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: Julet-style 3-pin female plug, 900 mm (about 35 in) cable, IP66. The same family is sold in 2- to 6-pin versions, so count the pins before you cut anything.\u003c\/p\u003e\u003cp\u003eCheck before you order: you need the opposite sex to the plug you are replacing. If the part you are repairing has a male plug, choose this female pigtail; if it has a female plug, choose the male version. The manufacturer does not list in text which wire goes to which pin, so note the wire positions on the old plug before cutting and join them one to one.\u003c\/p\u003e\u003cp\u003eSoldering or crimping, plus heat-shrink, is recommended for a lasting repair. Disconnect the battery first.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793744167185,"sku":"RR-JUL-PIG-3P-F-90","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-pig-3p-f.jpg?v=1792173806"},{"product_id":"3-pin-julet-style-pigtail-cable-male-plug-900-mm","title":"3-Pin Julet-Style Pigtail Cable, Male Plug, 900 mm","description":"\u003cp\u003eA pigtail is a plug on a short cable with bare wire ends. It is the repair part for a throttle, brake sensor, light or display whose plug has been cut off, burnt or corroded: cut the damaged plug off, splice this pigtail to the wires and the connector is as good as new. This one has a 3-pin male waterproof plug on one end and loose wires on the other.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: Julet-style 3-pin male plug, 900 mm (about 35 in) cable, IP66. The same family is sold in 2- to 6-pin versions, so count the pins before you cut anything.\u003c\/p\u003e\u003cp\u003eCheck before you order: you need the opposite sex to the plug you are replacing. If the part you are repairing has a female plug, choose this male pigtail; if it has a male plug, choose the female version. The manufacturer does not list in text which wire goes to which pin, so note the wire positions on the old plug before cutting and join them one to one.\u003c\/p\u003e\u003cp\u003eSoldering or crimping, plus heat-shrink, is recommended for a lasting repair. Disconnect the battery first.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793744232721,"sku":"RR-JUL-PIG-3P-M-90","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/jul-pig-3p-m.jpg?v=1792173813"},{"product_id":"5-pin-display-extension-cable-waterproof-to-sm-170-cm","title":"5-Pin Display Extension Cable, Waterproof to SM, 170 cm","description":"\u003cp\u003eThe display cable carries power and data between the controller and the dashboard. When it is chafed, cut or simply too short for a new handlebar layout, the display shows nothing, flickers or loses its connection. This 170 cm cable replaces or extends it: a 5-pin waterproof plug on one end and a 5-pin SM plug on the other.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 5-pin connectors, about 170 cm long, 50 g. The waterproof plug is 0.9 cm wide and the SM plug 1.4 cm wide. The SM plug wires are red (positive), blue (lock), black (negative), green (data receive) and yellow (data transmit). The manufacturer says it is for electric bikes with KT displays.\u003c\/p\u003e\u003cp\u003eCheck before you order: confirm that both of your plugs are 5-pin, that one is a waterproof round plug and the other an SM plug, and that the wire order of your display matches the list above. Plug shape and wire order differ between systems; do not use it with 3-pin or 6-pin displays, or with Bafang displays.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: switch off and disconnect the battery, unplug the old cable at both ends, route the new one along the frame and secure it with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793744265489,"sku":"RR-DSP-5P-SM-170","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/dsp-5p-sm-170.jpg?v=1792173821"},{"product_id":"5-pin-display-cable-for-bafang-female-to-female-577-mm","title":"5-Pin Display Cable for Bafang, Female to Female, 577 mm","description":"\u003cp\u003eIf a Bafang display sits too far from its harness plug, or its cable has been damaged, a 5-pin display cable joins the two again. This one is female at both ends and 577 mm (about 22.7 in) long. The manufacturer sells it for Bafang displays and says it also suits other displays with a 5-pin interface.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 5-pin waterproof plugs, ABS plug bodies that are flame retardant and wear resistant, black cable.\u003c\/p\u003e\u003cp\u003eCheck before you order: because both ends are female, it only works between two male plugs, for example a display lead that ends in a male plug and a harness socket that is also a male plug. If one of your two plugs is female, you need a male-to-female cable instead. Also confirm that both plugs are 5-pin; this cable does not change the pin count and will not fit 3-pin, 6-pin or SM-style plugs.\u003c\/p\u003e\u003cp\u003eInstallation takes about 5 minutes: switch the battery off, unplug the display, join the two male plugs with this cable and secure it with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793744298257,"sku":"RR-DSP-5P-FF-577","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/dsp-5p-ff-bafang.jpg?v=1792173828"},{"product_id":"usb-programming-cable-fits-bafang-bbs01-bbs02-bbshd","title":"USB Programming Cable - Fits Bafang BBS01 \/ BBS02 \/ BBSHD","description":"\u003cp\u003eBafang mid-drive controllers can be tuned from a computer: pedal-assist levels, speed and current limits and other parameters are set through a programming cable. This USB cable connects a PC to the programming plug of the Bafang BBS01, BBS02 and BBSHD systems. The manufacturer says it lets you set the drive up for more performance or smoother pedal assist.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: USB type A plug on one end and a round waterproof plug on the other, 40 inches (about 1 m) long, black.\u003c\/p\u003e\u003cp\u003eCheck before you order: this is the cable only. The manufacturer does not mention software, so you will need to bring your own compatible Bafang programming tool. Reprogramming the drive can damage the motor, so change one setting at a time and note the current values. The cable is for BBS01, BBS02 and BBSHD systems and is not for Bafang hub motors or other brands.\u003c\/p\u003e\u003cp\u003eConnect it with the battery switched on and the display disconnected as your programming tool instructs.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793744396561,"sku":"RR-BBS-USB-PROG","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bbs-usb-prog.jpg?v=1792173835"},{"product_id":"speed-sensor-extension-cable-fits-bafang-bbs-40-cm","title":"Speed Sensor Extension Cable - Fits Bafang BBS, 40 cm","description":"\u003cp\u003eOn long bikes such as cargo bikes and recumbents, the speed sensor lead of a Bafang mid-drive can fall short of the motor plug. This 3-pin extension cable (15.7 in, about 40 cm) adds the missing length between the speed sensor and its connector.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 3-pin waterproof connector with a threaded coupling, black cable, made for the speed sensor of Bafang BBS01, BBS02B and BBSHD motor kits (the BBS02\/BBSHD speed sensor uses a three-prong threaded connector).\u003c\/p\u003e\u003cp\u003eCheck before you order: look at the speed sensor plug on your motor. It must be a round, three-prong plug with a threaded ring. Speed sensors with a different plug, such as the 4-pin plug on Bafang M-series mid-drives, are not covered. This cable only extends the signal; it does not convert between plug types.\u003c\/p\u003e\u003cp\u003eInstallation takes about 5 minutes: switch the battery off, unscrew the sensor plug, fit the extension in line, tighten both threaded couplings by hand and secure the cable clear of the chain with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745150225,"sku":"RR-BBS-SPD-EXT-40","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bbs-spd-ext.jpg?v=1792173842"},{"product_id":"speed-sensor-fits-bafang-bbs01b-bbs02b-bbshd-uart","title":"Speed Sensor - Fits Bafang BBS01B \/ BBS02B \/ BBSHD (UART)","description":"\u003cp\u003eIf the speedometer on a Bafang mid-drive reads zero, or speed-based assist cuts in and out, a failed or knocked speed sensor is a common cause. This replacement sensor reads a magnet on the rear wheel and reports speed to the controller. The manufacturer lists it for the UART versions of the BBS01B, BBS02B and BBSHD (250 to 1000 W).\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: input 4.2 to 5.5 V, 2 pulses per revolution, operating temperature -20 to 45 C, sensing distance 0 to 5 mm, G4.3 connector. The product photo shows the sensor with a mounting bracket, fasteners and cable ties.\u003c\/p\u003e\u003cp\u003eCheck before you order: this part is for BBS01B, BBS02B and BBSHD systems with the UART controller. It is not for Bafang M-series or hub-motor systems, which use different sensors and plugs. Keep the gap between sensor and magnet within 5 mm, or the speed signal will drop out.\u003c\/p\u003e\u003cp\u003eInstallation takes 20 to 30 minutes: switch the battery off, fit the sensor on the chainstay, set the magnet gap, plug in and secure the lead with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745182993,"sku":"RR-BBS-SPD-SENSOR","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/bbs-spd-sensor.jpg?v=1792173846"},{"product_id":"dc-5-5-x-2-1-mm-charging-port-wire-set-plug-and-socket","title":"DC 5.5 x 2.1 mm Charging Wire Set, Plug and Socket","description":"\u003cp\u003eA burnt, loose or missing charging port stops a battery from taking charge. This set gives you the two halves of a DC 5.5 x 2.1 mm charging connection on wires: a male plug and a female socket, both with leads attached, so you can rebuild a damaged charging lead or fit a new socket to a battery or charger.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 5.5 mm outer diameter with a 2.1 mm center pin, one male connector and one female connector per set, up to 60 V, CE marked. The manufacturer does not state the wire gauge or a current rating, so use it for charging only, not for battery discharge or motor current.\u003c\/p\u003e\u003cp\u003eCheck before you order: measure your existing plug. Many e-bike chargers use a 5.5 x 2.1 mm barrel plug, but some use 5.5 x 2.5 mm, XLR or 3-pin connectors, which this set does not fit. Polarity matters: connect positive to positive and negative to negative. A reversed connection can destroy the charger. This is a wire set only, without battery or charger.\u003c\/p\u003e\u003cp\u003eSoldering skills and heat-shrink tubing are needed. Disconnect the battery and charger first.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745248529,"sku":"RR-PWR-DC21-SET","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/pwr-dc21-wire.jpg?v=1792173854"},{"product_id":"thumb-throttle-22-mm-bar-bare-leads-with-sm-plug","title":"Thumb Throttle, 22 mm Bar, Bare Leads with SM Plug","description":"\u003cp\u003eA cracked paddle, a sticky return spring or a dead signal means it is time for a new throttle. This thumb throttle clamps onto a 22 mm (7\/8 in) handlebar tube and gives proportional speed control with your thumb. Its 160 cm cable ends in bare wires, and an SM plug housing is supplied separately in the pack.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: made for 22 mm handlebar tubes, 160 cm cable, 50 g, plastic and metal construction with raised ribs on the thumb paddle, for controllers with a hall-type throttle input (5 V). The manufacturer quotes use on 12 V to 72 V systems. An L-shaped hex wrench is included.\u003c\/p\u003e\u003cp\u003eCheck before you order: the bare leads have to be fitted into a plug before the throttle will connect, so it suits people comfortable with crimping or soldering. Make sure your controller expects a three-wire hall throttle (positive, negative, signal) and that your bar is 22 mm. It is not for 2-pin or 5-pin throttle plugs, twist-grip handlebars or bars of a different diameter.\u003c\/p\u003e\u003cp\u003eInstallation takes about 20 minutes: disconnect the battery, slide the old throttle off, clamp the new one, wire the plug and test with the wheel off the ground.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745281297,"sku":"RR-THR-THUMB-22","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/thr-thumb-plain.jpg?v=1792173858"},{"product_id":"full-twist-throttle-grip-3-pin-waterproof-plug-22-2-mm","title":"Full-Twist Throttle Grip, 3-Pin Waterproof Plug, 22.2 mm","description":"\u003cp\u003eA worn rubber grip, a throttle that sticks or one that gives no signal can all be fixed with a new full-twist throttle. This grip twists to give proportional speed control and replaces the right-hand grip. It ends in a 3-pin waterproof plug on a 310 mm cable.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: made for 22.2 mm handlebars, installed on the right side, rubber and ABS construction with a non-slip surface, 310 mm cable, listed for 12 V to 72 V controllers. A hex wrench is included.\u003c\/p\u003e\u003cp\u003eCheck before you order: the wire order of the plug has to match your controller, and the manufacturer warns that the throttle will not work if it does not. The pin-to-wire order is not published, so compare the plug with your old throttle and send us a photo if you are unsure. Confirm that your plug is 3-pin and that your bar is 22.2 mm. It is not for 2-pin or 5-pin plugs, left-hand mounting or thumb-throttle setups.\u003c\/p\u003e\u003cp\u003eInstallation takes about 15 minutes: disconnect the battery, remove the right grip and brake lever clamp as needed, fit the throttle, secure the cable and test with the wheel raised.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745314065,"sku":"RR-THR-TWIST-3P","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/thr-full-twist-3p.jpg?v=1792173862"},{"product_id":"brake-lever-pair-2-pin-power-cut-off-22-mm-bar","title":"Brake Lever Pair with 2-Pin Power Cut-Off, 22 mm Bar","description":"\u003cp\u003eWhen an e-bike brake lever is bent, cracked or no longer cuts the motor, this pair replaces both sides in one go. The levers carry a 2-pin waterproof motor cut-off connection, so pulling a lever tells the controller to stop driving the motor. They fit 7\/8 in (22 mm) handlebars.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: a solid aluminum alloy core (not hollow) with an anodized matte finish, 7\/8 in or 22.5 mm handlebar clamps, comfortable V-brake style grip, for mechanical disc brakes. The pack contains the lever pair and two brake cables and weighs 0.35 kg.\u003c\/p\u003e\u003cp\u003eCheck before you order: this is a cable-pull (mechanical) lever. It is not for hydraulic brakes. Look at the cut-off plug on your bike: it has to be a 2-pin plug, and the manufacturer does not say whether it is male or female or what shell shape it is, so send a photo. Handlebars must be 22 mm.\u003c\/p\u003e\u003cp\u003eInstallation takes about 30 minutes: disconnect the battery, remove the grips and old levers, fit the new pair, thread the cables, adjust the brake and plug the cut-off leads in.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745379601,"sku":"RR-BRL-2P-PAIR","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/brl-2p-1pz.jpg?v=1792173869"},{"product_id":"36v-48v-350w-sine-wave-brushless-controller-with-lcd","title":"36V\/48V 350W Sine-Wave Brushless Controller with LCD","description":"\u003cp\u003eIf a controller has failed, the bike may be dead, cutting out under load or throwing errors. This 36V\/48V 350 W brushless sine-wave controller is a replacement for small hub-motor e-bikes and comes with an LCD control panel. The product photo shows the panel built into a thumb-throttle style unit.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 36 V and 48 V, 350 W, sine-wave drive for smooth quiet running, grooved aluminum alloy housing about 93 x 52 x 29 mm, built-in under-voltage and over-current protection, color-coded wiring, one-year manufacturer warranty. The panel shows basic data such as battery status and mileage.\u003c\/p\u003e\u003cp\u003eCheck before you order: a controller must match your motor and battery. The manufacturer does not state the current limit, the plug types, whether the motor must have hall sensors, or the display protocol, so please send photos of your old controller label and its connectors before ordering. It is not for 24 V, 52 V or 60 V packs, nor for motors above 350 W.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended. Disconnect the battery first and join wires one to one by function.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745412369,"sku":"RR-CTL-350W-LCD","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/ctl-350w-lcd.jpg?v=1792173874"},{"product_id":"30a-sine-wave-controller-kit-with-cs866-color-display","title":"30A Sine-Wave Controller Kit with CS866 Color Display","description":"\u003cp\u003eThis kit replaces the whole electronic control set on a hub-motor e-bike: a 30 A sine-wave controller, a CS866 color display, a throttle and a pedal-assist sensor in one pack. It is meant for conversions and for bikes whose old controller and display are both beyond repair.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 24 V, 36 V and 48 V, 30 A, aluminum housing, works with hall and non-hall brushless motors using automatic motor phase learning, listed for 500 to 1800 W hub motors. The display shows speed, battery level and mileage, and settings such as wheel size (P06), voltage (P03) and assist levels (P05) can be changed. The display has a lighting wire rated 0.15 A at battery voltage, and the throttle mounts on either side.\u003c\/p\u003e\u003cp\u003eCheck before you order: all four parts come as a matched set, so it replaces your controller, display, throttle and pedal-assist sensor together. It will not mix with an existing display. Check your battery voltage and your motor's power rating, and make sure the plugs of your motor suit the controller wires; send us photos if you are unsure.\u003c\/p\u003e\u003cp\u003eInstallation is a full re-wire and takes about 1 to 2 hours. Disconnect the battery first.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745445137,"sku":"RR-CTL-30A-CS866-KIT","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/ctl-30a-cs866-kit.jpg?v=1792173878"},{"product_id":"48v-64v-72v-1000-1500w-brushless-sine-wave-controller","title":"48\/64\/72V 1000-1500W Brushless Sine-Wave Controller","description":"\u003cp\u003eThis is a high-power replacement controller for hub-motor e-bikes running 48 V, 64 V or 72 V. It drives 1000 to 1500 W brushless motors with sine-wave control for smoother, quieter acceleration, and it works with both hall-sensor and sensorless motors, so it can rescue a bike whose hall sensors have failed.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 12-MOSFET design in a thick grooved aluminum housing, self-learning motor setup, under-voltage, over-current and stall protection. Every wire carries a printed function label: battery positive and negative, phase wires, throttle, high and low brake inputs and self-learning. About 588 g.\u003c\/p\u003e\u003cp\u003eCheck before you order: a controller must match your motor and battery. Confirm your pack is 48 V, 64 V or 72 V and your motor is rated 1000 to 1500 W. The manufacturer does not describe the plug types or the current limit, so send photos of your old controller label and wires before ordering. It is not for 24 V or 36 V systems, or for mid-drive motors.\u003c\/p\u003e\u003cp\u003eInstallation takes about 1 hour. Disconnect the battery and connect only the functions you need; unused wires can stay insulated.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745477905,"sku":"RR-CTL-1500W-SINE","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/ctl-72v-1500w.jpg?v=1792173885"},{"product_id":"s866-lcd-display-24v-36v-48v-uart-sm-plug","title":"S866 LCD Display, 24\/36\/48V, UART, SM Plug","description":"\u003cp\u003eA cracked screen, dead buttons or a blank display make an e-bike hard to read and sometimes hard to ride. This S866 LCD display replaces it: a backlit screen with speed, battery level and trip data, mounted on a 22.2 mm handlebar clamp and connected through an SM plug.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: UART communication protocol, 24 V, 36 V and 48 V, IP65, ABS housing, backlit LCD with three buttons, bracket for 22.2 mm (0.9 in) bars, about 138 g. A manual is included.\u003c\/p\u003e\u003cp\u003eCheck before you order: the display and the controller have to speak the same protocol. This display uses UART and an SM plug; the manufacturer asks buyers to check that the protocol matches before purchase, and the pin count and wire order of the plug are not published. Send us a photo of your old display and its plug first. It is not for KT-protocol or Bafang systems unless your controller is UART, nor for 52 V or 60 V systems.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: disconnect the battery, unplug the old display, clamp the new one in place, plug in and test.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745510673,"sku":"RR-DSP-S866","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/dsp-s866.jpg?v=1792173890"},{"product_id":"e-bike-headlight-12-60v-2-pin-julet-male-plug-200-lumen","title":"E-Bike Headlight 12-60V, 2-Pin Julet Male Plug, 200 lm","description":"\u003cp\u003eA dead or dim headlight is a safety problem on a night ride. This 4-LED e-bike headlight puts out 200 lumens and plugs straight into the light output of a controller or mid-drive motor that has a 2-pin waterproof Julet connector, so there is no splicing.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 12 V to 60 V input, 3 W, 200 lumens from 4 LEDs, 2-pin Julet male waterproof plug on a 63 cm cable, fork mount, plastic body, 50 x 62 x 70 mm and 82 g.\u003c\/p\u003e\u003cp\u003eCheck before you order: your bike's light output must supply 12 V to 60 V. Systems that only give 6 V at 3 W, common on some bikes, cannot power this light. The manufacturer also warns that it does not fit some SM-style controllers because the connector is different. Look for a round 2-pin waterproof socket on your controller or motor harness before ordering.\u003c\/p\u003e\u003cp\u003eInstallation takes about 10 minutes: switch the battery off, mount the light on the fork or handlebar bracket, plug into the light socket and route the cable with zip ties.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793745543441,"sku":"RR-LIGHT-HEAD-2P","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/light-head-2p.jpg?v=1792173897"},{"product_id":"e-bike-tail-light-with-brake-and-turn-signal-wires-36-60v","title":"E-Bike Tail Light with Brake Light, 36-60V","description":"\u003cp\u003eA rear light that has died or cracked leaves you invisible to traffic at night. This 36 V to 60 V tail light has a bright red lens that lights up when the brakes are applied, a running-light circuit and wires for left and right turn signals, with a wide 300 degree viewing angle.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 36 to 60 V, IPX4 water resistance, hard polycarbonate lens, frame-mount bracket, 4.3 x 1.0 x 2.1 in (about 110 x 25 x 53 mm), 90 g. It can be wired to the controller or straight to the battery. Wire functions: white brake negative, blue brake positive, black negative, red running light, yellow left turn, green right turn.\u003c\/p\u003e\u003cp\u003eCheck before you order: this light has bare wires, so it needs splicing or plug-in connectors, and it only suits systems of 36 V to 60 V. The turn-signal and brake wires only work if your bike has matching switches or controller outputs; without them the light still works as a rear light. Not for 24 V or 72 V systems.\u003c\/p\u003e\u003cp\u003eInstallation takes about 30 minutes: disconnect the battery, bolt the bracket to the frame or rack, connect the wires by function and insulate every joint.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793746297105,"sku":"RR-LIGHT-TAIL-BRAKE","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/light-tail-36-60.jpg?v=1792173904"},{"product_id":"dc-dc-step-down-converter-72v-to-12v-10a-120w","title":"DC-DC Step-Down Converter 72V to 12V, 10A 120W","description":"\u003cp\u003eLights, horns, USB ports and other 12 V accessories on a high-voltage e-bike run from a DC-DC converter that steps the battery voltage down. When it burns out, the accessories die. This converter takes a 72 V pack, also 60 V and 48 V, down to a steady 12 V at up to 10 A (120 W).\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: 12 V output within 2 percent, 10 A, 120 W, efficiency at least 95 percent, ripple 50 mV, start-up delay under 2 s, over-current, overload, short-circuit and over-temperature protection, operating range -40 to 80 C, compact aluminum case with epoxy potting, 264 g. It is a non-isolated module.\u003c\/p\u003e\u003cp\u003eCheck before you order: the manufacturer quotes the input range as 30 to 90 V in one place and 40 to 90 V in another, so for safety treat 40 to 90 V as the working range and do not use it on a 36 V pack. The 12 V side must not draw more than 10 A. This item is a bare module with wires, so it needs fuse protection and proper connectors; polarity must be correct.\u003c\/p\u003e\u003cp\u003eDisconnect the battery before wiring, and fuse the input.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793746329873,"sku":"RR-PWR-DCDC-72-12-10A","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/dcdc-72-12-10a.jpg?v=1792173909"},{"product_id":"54-6v-2a-charger-for-48v-lithium-e-bike-batteries-ul-listed","title":"54.6V 2A Charger for 48V Li-ion E-Bike Batteries, c-UL-us Listed","description":"\u003cp\u003eA 48 V lithium-ion e-bike battery needs a charger with the right output voltage: 54.6 V is the full-charge voltage of a 48 V pack. This charger delivers 54.6 V at 2 A from a standard wall outlet and is for 48 V lithium-ion e-bike batteries only. It is listed by the manufacturer as c-UL-us Listed.\u003c\/p\u003e\u003cp\u003eKey facts as stated by the manufacturer: output 54.6 V 2 A, 100 to 240 V mains input, built-in over-voltage, over-current, short-circuit and over-temperature protection, LED status light, flame-retardant housing. The manufacturer describes a DC 5.5 x 2.5 mm \/ 2.1 mm plug with 12 mm 3-pin and 18 mm XLR connector options, and a quiet fanless design.\u003c\/p\u003e\u003cp\u003eCheck before you order: the output voltage must match your battery. Read the label on your current charger: it must say 54.6 V, and the connector must be the same. The manufacturer says it is not for any other voltage, lead-acid or LiFePO4 batteries, scooters or hoverboards. Do not use it on a battery whose voltage you cannot confirm.\u003c\/p\u003e\u003cp\u003eConnect the charger to the battery first, then to the wall outlet, and never leave a charging battery unattended.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Email photos to support@riderow.com and we'll check before you order.\u003c\/p\u003e","brand":"RideRow","offers":[{"title":"Default Title","offer_id":67793746362641,"sku":"RR-CHG-54V6-2A","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6928\/4113\/files\/chg-54v6-2a-ul.jpg?v=1792173913"}],"url":"https:\/\/riderow.com\/collections\/all-parts.oembed?page=4","provider":"RideRow","version":"1.0","type":"link"}